Q: How do I connect my headphones to UA Record?
A: To set up and enjoy all the features of your UA Sport Wireless Heart Rate, you’ll need to connect it to your phone using the UA Record™ mobile app. Select the UA Sync icon in the upper right hand corner of the dashboard. Tap on “UA Sport Wireless Heart Rate”. Follow the on-screen instructions to finish setup. Once connected, the headphones will live under My Apps and Devices. Here, you can access your headphones' settings to check your battery level, current heart rate, and help.
Q: How do I use my UA Headphones with Record?
A: Connect your headphones and start a workout using UA Record's heart rate zone tracking. Track your current heart rate zone so you know when to rest or power up, while also viewing your total heart rate distribution throughout each training session. Know your current, average, and peak heart rate. You also have the option to hear your stats read aloud during a workout. With UA Record, you can customize what feedback you hear by setting your stats, frequency, voice, and volume.
Q: Where does the data collected from my headphones go?
A: All of the data collected by the UA Sport Wireless Heart Rate is stored in the UA Record mobile app, which is part of the Under Armour Connected Fitness platform. The UA Record mobile app is available now for download on the Apple App Store or from the Google Play Store. As part of the Under Armour Connected Fitness family of apps, your workout information can also sync to UA MapMyRun.
Q: Can I connect the headphones to my UA Band?
A: Yes, Once you've added your UA Sport Wireless Heart Rate to the UA Record mobile app any workout started on your UA Band will automatically connect to the headphones if powered on and present. The Band will indicate the heart rate sensor is connected and begin showing your heart rate zones using the color LED on the side of the Band.
Q: How do I connect my headphones to apps other than UA Record?
A: Your headphones can be used with other leading fitness apps, such as MapMyRun, that support bluetooth heart rate sensors. To enjoy your headphones with other apps ensure they are first turned on. Press and hold the center button on the inline microphone located below the right earpiece. It helps to have one of the ear inserts in your ear to listen to the audible voice prompts. If this is your first time using the headphones, the headphones will automatically go into search mode. You will hear the audible voice stating, “power on” followed by “looking for device”. You will see the LED light alternate between red and blue as it searches for the device. This light is located at the bottom of the inline mic. Make sure your device that you are attempting to connect to is in search mode. Within a few seconds the UA|HR Audio followed by a 6 digit code should appear on your discoverable devices. Once connected, you will hear the audible voice state, “audio connected.” When the headphones are connected, the LED light will display a blinking blue light. Now open your workout app that supports bluetooth heart rate sensors and follow that app's process for pairing a heart rate device. Your headphones will appear as UA|JBL HR followed by a 6 digit code.
Q:Where can I check my current heart rate?
A: There are multiple ways to check your heart rate (HR) while using your headphones both in and out of workouts. On the UA Record mobile app select the UA Sync icon in the upper right hand corner of the dashboard. If your headphones are connected, they will appear under "My Apps and Devices". Tap on "UA Sport Wireless Heart Rate" and you will see your headphones settings. Your current heart rate will appear under the headphones' image. You will hear your heart rate when using the headphones during a UA Record workout with audio coaching. While using with your UA Band during a workout your HR will be shown with your workout stats and will coordinate with the HR zone LED on the Band. You also can simply tap the UA logo on the RIGHT ear bud to hear the audible voice stating your heart rate reading.
Q: Where can I view detailed heart rate stats after I complete a workout with my headphones?
A: You can view stats from your past workouts by going to your dashboard and tapping the Fitness quadrant. Tap the workout you would like to view. Your average and peak heart rate, heart rate distribution through your training session, and a graph of your real-time heart rate, will all be shown.
Q: Can I customize my Heart Rate Zones?
A: Currently in Record, you can not customize ranges for each heart rate zone but you can customize your Max heart rate, which affects your zone ranges. Edit your Max heart rate by going to My Profile page by tapping the person icon in the top left corner. Tap the edit button in the top left corner to edit the Max HR field.
Where is the Heart Rate sensor?
The sensor is located in the LEFT ear bud. The left enhancer will feature a cut out for the sensor and should be fully exposed.
How do I know if the Heart Rate sensor is in the correct position?
You will hear an audio prompt to readjust the position of the left ear piece stating “heart rate not detected, adjust ear bud position”. The sensor is also in the correct position when the green LED light is not visible from the outside of your ear.
Q: My headphones told me heart rate disconnected. How do I reconnect it?
A: Tap-hold on the right ear bud forcefully to reconnect heart rate. If this does not work, Hold the middle button to turn off, then back on your headphones.
Q: How do I make sure to get the best heart rate reading and accuracy?
In order to ensure the best accuracy, it is important that you are using the proper size and the headphones securely fit in the ear. Please reference FAQ: How do I find the proper fit? to make sure you are wearing them correctly.
You should also make sure that the enhancers are properly installed on the ear buds so that material is fully stretched over the bud and the window for the heart rate (HR) sensor is not covered. Please reference FAQ: How do I switch enhancer sizes? for more guidance.
Once you've found your ideal size and ensure they're installed correctly, make sure the HR sensor is on. When it is on, you will see a green light on the LEFT ear bud and should hear the audio prompt stating, “Heart Rate sensor on”.
For best results, insert the earphone into your ear so that the green heart rate sensor on the LEFT ear bud is fully hidden inside the ear (behind your tragus). Double check that the ear bud is touching the back of the bowl of your ear for the most accurate signal - this is often times achieved by using the largest size that fits comfortably in your ear. Lastly, the ear loop should not be pushed backwards to align with arc of the ear perfectly; it is likely there will be negative space between the headphone loop and your ear.
You should hear the audible alert telling you if the ear bud needs to be adjusted if it is unable to retrieve a proper reading on your heart rate.
Heart Rate accuracy can vary depending on the type of exercise you are performing; it is recommended for steady state endurance-oriented activities to ensure best accuracy. While the technology is state-of-the-art, there are limitations that may cause some readings to be inaccurate under certain circumstances. These circumstances include physical characteristics, fit, and the type of activity as outlined above. The heart rate monitor data is not intended to be used for medical purposes, nor is it intended to diagnose, treat, cure or prevent any disease or condition.
Q: How do you find the proper fit?
First, it is very important that you use the correct size enhancers (rubber tips). This headphone features the TwistLock technology that is uniquely designed to fit in the bowl of the ear (vs. inner ear). They may look bigger than traditional ear buds, but this design provides the most secure fit to ensure they never fall-out in the most active workouts.
To properly put them on, first make sure you have the Right and Left ear bud in the correct ear. The number to indicate the enhancer size is featured on the inside of the enhancer next to the large L or R (left ear, right ear).
Next, gently insert the enhancer into your ear with a forward motion towards the jaw, which should twist and lock the enhancer into place. After the enhancers are securely locked in the ear, we recommend wrapping the ear loop up and over the ear for the most comfortable fit. Please note, the ear loop should not be pushed backwards to align with arc of the ear perfectly; it is likely there will be negative space between the headphone and your ear.
The size 7 will be featured on the model; two smaller sizes (5 & 6) and one larger (8) will be included in the packaging. If you experience discomfort wearing the size 7, try the next size down. If you try a smaller size and the headphones fall out easily or the enhancer does not extend fully to the back of the bowl of the ear, you should try a bigger size.
If you’re unable to find a secure fit, one our fit specialists can assist you with a different size or guidance on how to properly wear these headphones. For any questions or concerns regarding fit and sizing, please contact your local JBL Customer Support or please email us firstname.lastname@example.org.
Q: How do I switch the enhancer sizes?
The best way to remove the enhancer from the ear bud is to gently pull back the outer rim of the enhancer that is located around the base of the ear bud. When replacing the current enhancers with a different size, please make sure to align the funnel of the enhancer tip over the small speaker screen of the headphone casing. The LEFT enhancer will feature the square cut out that allows you to receive your Heart Rate reading. It is important that the small digital square on the ear bud is fully exposed and the enhancer cut out is placed around it and not over it. If the enhancer is not attached properly, you will hear the audible voice stating that it cannot receive an accurate reading on your heart rate and you will need to readjust the enhancer.
Q: What is the clip in the headphones box used for?
A: A clip has been included to help ensure the best fit and security of the headphones. Placing the clip on the audio cord and attaching to the top back of your shirt you should be able to twist your head right and left without the clip pulling your ear.
Q: If I have two or more Heart Rate devices connected to UA Record, how can I select my headphones to be used for my workout?
When starting a workout in UA Record, the workout setup screen will display the heart rate monitor that is currently connected to your phone. Make sure your UA Sport Wireless Heart Rate are turned on and the logo is displaying in the heart rate monitor section.
How do I power on and off the headphones?
Press and hold the center button on the inline microphone located below the right earpiece. It helps to have one of the ear inserts in your ear to listen to the audible voice prompts. If this is your first time using the headphones, the headphones will automatically go into search mode. You will hear the audible voice stating, “power on” followed by “looking for device”. To power off, press and hold the center button on the inline microphone until you hear the audible voice stating, “power off.” The flashing LED light should change to a solid red light before completely turning off.
Q: How do I charge these headphones?
The UA Sport Wireless Heart Rate must be charged with a micro USB charger that is provided in the packaging. You will find the USB outlet located on the bottom left side of the inline microphone. There will be a small rubberized window that you can slide up and over to expose the outlet. After plugging in the headphones, you will see a solid red light appear at the bottom of the inline microphone. Once the headphones are fully charged, the red light will turn off. It typically takes less than 2 hours of charging time in order to receive the 5 full hours of audio playback.
Q: How do I know the battery level of my headphones?
A: Select the UA Sync icon in the upper right hand corner of the dashboard. If your headphones are connected, they will appear under "My Apps and Devices". Tap on "UA Sport Wireless Heart Rate" and you will see your headphones settings. Your headphones' battery life appears in the top left corner. If you have an IOS device, you also will be able to see the battery life indicator in the upper right hand corner next to the BT symbol. Additionally, you should hear the audible voice stating ‘low battery’ when you have 15-20 minutes left of battery life left on the headphones.
Q: How long does the battery last?
A: Up to 5 hours. Your battery life will vary based on your usage - music, volume and use of heart rate sensor.
Q: How do I connect to a different device?
If you want to pair and connect to a different device, make sure the headphones are turned off. Proceed to turn the headphones on by pressing and holding the power button for 3- 5 seconds until you hear the audible voice stating “power on” followed by “looking for device.” You will see the LED alternate between blue and red as it searches for your new device. Make sure your device is in search mode. Within seconds your headphone should appear as one of your discoverable devices. You will then hear the audible voice stating, “audio connected” followed by a blinking blue LED light located on the inline microphone indicating that it is now connected to a device.
Q: What is the Bluetooth range?
The Bluetooth range varies. However, you should get up to 15 meters (just under 50 ft.) when using the product indoors. If you are using the headphones outside, conditions vary based on surroundings and body mass. For the best connectivity results, please make sure that the device you are paired to is in the front of your body.
Q: Can I turn the Heart Rate sensor off and still use the headphones for audio?
You can turn the Heart Rate sensor off and still use the headphones for audio by placing your finger on the right earpiece for 3-4 seconds. You will hear an audio prompt stating, “Heart Rate disconnected” which will turn the Heart Rate sensor off. If you wish to turn the sensor back on, simply place your finger on the RIGHT earpiece again for 3-4 seconds until you hear the voice prompt stating that the Heart Rate sensor has been turned back on.
Q: Do I have to have my phone on me for the headphones to work?
A: Yes, they are connected to your phone using bluetooth. If you get out of range, the heart rate and music connection will be dropped.
Q: How do I skip tracks?
If you want to skip your track forward, simply press and hold the top button on the inline microphone. If you want to skip the track backward, press and hold the bottom button until you hear the track skip backward. You typically hold the button for 1-2 seconds in order to advance to the next track or to go backwards.
Q: How do I adjust the volume?
In order to increase the volume, quickly press the top button located on the inline microphone with several quick clicks. If you want to decrease the volume, quickly press the bottom button with several quick clicks until desired volume is achieved.
Q: Can I swim with these headphones?
No. These headphones are not waterproof. Swimming with these headphones will cause significant and irreversible damage and will not be covered under warranty.
Q: Can I wear these headphones in the rain?
Although the product is Water Resistant and Sweat Resistant, continuous exposure to water over an extended period of time may damage your earphones.
Q: How do I redeem my free 1-year membership to MapMyRun?
Instructions are located on a MapMyRun insert in the product box. There will be a 15 Character Access Code printed on the insert card, or you can visit www.mapmyrun.com/promo/uawireless. If you are not a MapMyRun Member you will need to register on the website before you can redeem your Access Code. If you are already a member with an Annual Premium Membership you cannot combine memberships. You will need to visit the link and use your code to renew for 1-Year when your current membership has expired. Refer to the expiration date on your Access Code to ensure that it does not expire. If you are a member with a monthly Premium Membership you can cancel your monthly premium and then visit the link to enter the 1-Year Access Code. If you experience any issues with the code or have additional questions, please reach out to the customer service team email@example.com.
Q: I am having trouble setting up my UA Sport Wireless Heart Rate headphones with my device running Android N (also known as Nougat, version 7.0). How can I get it work?
Android N version 7.0 may have some compatibility issues with your headphones that are resolved in Android version 7.1. If your device is running Android N 7.0, please update it to 7.1.